|
|
|
|
|
|
Gear Set Primary
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $119.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Primary Gear Set
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $129.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
70cc MHR Replica Cylinder Kit
|
List Price: $325.00
Our Price: $299.00
Sale Price: $100.00
You Save $225.00
|
|
|
The MHR Replica line of cylinder was created especially for the International Scooter Trophy 70cc Automatic Class. These cylinder kits were designed to guarantee maximum performance in this category, while at the same time assuring extremely long product life.
In order to guarantee these special characteristics, Malossi MHR Replica cylinder kit have pistons with two chrome-plated rectangular segmants and a compression ratio of 13.8:1, plus torque value of 7.35 N.m. (o.75 Kgm) at 8.000 rpm and power of 6.6 Kw (9 C.V.) at 8.500 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
MHR Brake Pads
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $4.95
|
|
|
Race Track born but perfectly suited for the chaotic conditions of city traffic. MHR Pads are slower to reach optimum working temperature but provide exceptional braking at elevated speeds where deceleration is need the most.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sport Brake Pads
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $4.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MHR Brake Pads
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $5.25
|
|
|
MHR Brake Pads are slower to reach operating temperature but have greater stopping power at elevated speeds.
|
|
|
|
|
|
|
|
|
|
|
|
|
Italjet Dragster 180 Malossi Delta Adjustable Clutch
|
|
|
Adjustable Delta Clutch for Piaggio 125 and 180cc 2 Stroke Engines as in the Italjet Dragsters Piaggio Hexagon and Skipper and Gilera Runner. This item s a closeout at below 50% discount
|
|
|
|
|
|
|
|
|
|
|
|
|
TC Unit
|
Our Price: $149.95
Sale Price: $69.00
You Save $80.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cyl Kit 70cc
|
Our Price: $134.90
Sale Price: $84.95
You Save $49.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dr Pulley Clutch Bell
|
|
Our Price: $69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dr Pulley Sliding Roller 29gr
|
|
Our Price: $59.99
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dr Pulley Sliding Roller 25x22 -30gr
|
|
Our Price: $59.90
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dr Pulley Sliders
|
|
Our Price: $5.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Driver
|
|
Our Price: $79.00
|
|
|
This component called Torque Driver for its specific function of determining the exact shifting moment, was calculated to give the vehicle the maximum possible acceleration in connection with the specific power of any single engine. The spiral's peculiar shape was studied to fix the RPMs on the point of maximum power.
It was expressly created to complete the development of boosted motors withour cylinders, variators and the special Malossi Kevlar Belts, allowing to fully exploit your vehicle's notable torque and power.
The new Malossi mobile driven split pulley ensures, on boosted vehicles,extraordinary acceleration and an extremely progressive and fluid torque output to the wheel. The tracks on the Malossi mobile driven split pulley were studied and designed on CAD-CAM systems and machined on CNC machinetools in order to guarantee total interchangeability with the original component and extremely high machining accuracy.
This new Malossi product is a concentrate of today's state-of-the-art technology.
|
|
|
|
|
|
|
|
|
|
|
|
|
TC Unit RPM Control
|
Our Price: $114.95
Sale Price: $65.90
You Save $49.05
|
|
|
TC Contrl Unit ELECTRONIC COILS
The continuous development of electronics in the automotive segment led Malossi to the creation and marketing of a complete line of electronic coils for scooters to be used on the street and for races which is at the highest level of technology.
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital Eprom MHR
|
Our Price: $259.00
Sale Price: $159.90
You Save $99.10
|
|
|
ELECTRONIC COILS
The continuous development of electronics in the automotive segment led Malossi to the creation and marketing of a complete line of electronic coils for scooters to be used on the street and for races which is at the highest level of technology.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brake Pads MHR
|
Our Price: $18.95
Sale Price: $5.29
You Save $13.66
|
|
|
BRAKE PADS sport - MHR - MHR SYNT
Brake pads
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture).
- Brake Pads Sport feature increased braking life compared to the original pads and in addition they supply a greater braking power even at lower speeds.
- Brake Pads MHR are slower to reach working temperature but provide exceptional braking at elevated speeds where deceleration is needed the most.
- Brake Pads MHR Synt : sintered without asbestos, are manufactured with a specific material that makes them an optimal choice for extreme riding conditions.
- Malossi recommends them for MAXI SCOOTERS and for SCOOTERS 50 with hiper racing utilisation.
The most evident qualities of these brake pads due to their high friction level, even at low temperatures, in comparison to the original ones, is reduced braking distance and longer life. The use of cast-iron discs is not recommended with these sintered brake pads.
Malossi Brake Pads series have passed with flying colours all the severe performance and endurance tests subjected by Malossi testers and pilots. Therefore they are ready to move from the racetracks to everyday streets!
|
|
|
|
|
|
|
|
|
|
|
|
|
Brake Pads
|
Our Price: $13.95
Sale Price: $4.95
You Save $9.00
|
|
|
BRAKE PADS sport - MHR - MHR SYNT
Brake pads
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture).
- Brake Pads Sport feature increased braking life compared to the original pads and in addition they supply a greater braking power even at lower speeds.
- Brake Pads MHR are slower to reach working temperature but provide exceptional braking at elevated speeds where deceleration is needed the most.
- Brake Pads MHR Synt : sintered without asbestos, are manufactured with a specific material that makes them an optimal choice for extreme riding conditions.
- Malossi recommends them for MAXI SCOOTERS and for SCOOTERS 50 with hiper racing utilisation.
The most evident qualities of these brake pads due to their high friction level, even at low temperatures, in comparison to the original ones, is reduced braking distance and longer life. The use of cast-iron discs is not recommended with these sintered brake pads.
Malossi Brake Pads series have passed with flying colours all the severe performance and endurance tests subjected by Malossi testers and pilots. Therefore they are ready to move from the racetracks to everyday streets!
|
|
|
|
|
|
|
|
|
|
|
|
|
CLOSEOUT-Special Belt for Piaggio Typhoon
|
|
Our Price: $18.95
|
|
|
The Special Belt is a trapezoidal toothed drive belt for automatic variators with high technological content.
Thanks to its high experience on the roads of whole Europe with automatic scooters, in collaboration with specialized companies of this field, Malossi s.r.l. created a complete line of toothed belts for your scooters.
As they are made of a special mixture with a very high resistance and a very low wear, the Special Belts were created to assure the maximum long-life of the product for many kilometers under safe conditions.
The special design of our belts and the work corner have been designed and tested in the specific for each type of scooter to grant the exploitation of the utmost power of your engine. At this price just keep some on hand for emergency use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crankshaft MHR Team
|
|
Our Price: $395.00
|
|
|
|
|
|
|
|
|
|
