|
|
|
|
|
|
TC Unit K15
|
Our Price: $124.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RHQ Crankshaft MHR 12mm Pin
|
|
Our Price: $359.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50cc Cylinder Kit
|
|
Our Price: $179.00
|
|
|
An excellent way to improve performance and remain at 50 cc. This vast improvement over the original parts complies with some legal issues where a size change modifies the registration category and both licensing and insurance.
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner Rotor Ignition
|
|
Our Price: $479.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carburator Kit PHBL 25 MHR
|
|
Our Price: $269.00
|
|
|
Malossi fuel system
These systems have been specially designed and calibrated for high-performancemotors, and are complete with all accessories needed for assembly (see generalcatalogue). MALOSSI is the leader in the design and production of specialfuel systems for motorcycles and scooters.
MALOSSI systems are the result of intense research and precision drawingsand calculations. The suction pipes, reed valves, and air intakes designedby MALOSSI undergo efficiency tests and destructive tests to check theirperformance and reliability.
Carburetors are customized for each vehicle according to the specific characteristicsof the motor and air intake, and are completely calibrated for dosage ofthe air-fuel mixture under all power delivery conditions.
MALOSSI produces special components for fuel systems in order to supplya product that responds perfectly to the needs of the most demanding customer.
|
|
|
|
|
|
|
|
|
|
|
|
|
TORSION CONTROLLER for eng. 50 cc PIAGGI O - HONDA - KYMCO - PEUGEOT- SYM
|
|
Our Price: $8.99
|
|
|
Antifriction fifth wheel for variator contrast spring
A secret from Malossi racing department
Light, perfect: a technology extract in its simplicity; design and formula of the materials are registered.
Abstract from of Malossi Engineering R& D department archives
|
|
|
|
|
|
|
|
|
|
|
|
|
Red Sponge Air filter
|
|
Our Price: $7.98
|
|
|
RED SPONGE
for original filter box
Self-extinguishing, expanding polyurethane filter elements with an increased air and filtering capacity, designed for sporting applications. You can recognise Red Sponge immediately by its distinctive Malossi red colour and the yellow trademark.
|
|
|
|
|
|
|
|
|
|
|
|
|
Exhaust System MHR
|
|
Our Price: $349.00
|
|
|
SCOOTER RACING EXHAUST SYSTEM “The Racing Exhaust developed on the racetrack for the racetrack”.
It is one of the essential components intended for MALOSSI SCOOTER 70cc trophies , studied especially to increase the power of the engine at medium and high regimes.
The Malossi Scooter Trophies are raced in all the world according to precise rules that require different Special Malossi Racing products for each category. This insures an optimum and homogeneous result for the various participants while utilizing the most advanced technologies.
With the SCOOTER RACING exhaust sytems Malossi expands its range of trophy exhaust systems, that represents the highest performances in the sector.
Another Malossi’ initiative which provides an opportunity for the young to participate in a two-wheeled sport and become the riders of the future.
TECHNICAL FEATURES
EXHAUST in special sheet steel (0.8/0.10 mm thickness) manufactured using robotic T.I.G.and M.I.G. welding and manual torch welding with oxy-acetaline, artiginally peened. Clear coat finish.
SILENCER in aluminum with satin finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
Intake Manifold MHR 21x24.5
|
List Price: $85.95
Our Price: $80.00
Sale Price: $72.00
You Save $13.95
|
|
|
Intake manifold conveys the air-fuel mixture to the engine by means of reed valve.
The total efficiency of an engine is calculated as the product of various partial efficiencies, such as:
- volumetric efficiency
- thermodynamic efficiency
- mechanical efficiency
Volumetric efficiency is the ratio between the quantity of fuel that can enter the combustion chamber and the displacement of the engine
|
|
|
|
|
|
|
|
|
|
|
|
|
Intake Mamifold MHR Viton Inclined 21x24.5
|
List Price: $125.00
Our Price: $119.00
Sale Price: $110.00
You Save $15.00
|
|
|
Intake manifold conveys the air-fuel mixture to the engine by means of reed valve.
The total efficiency of an engine is calculated as the product of various partial efficiencies, such as:
- volumetric efficiency
- thermodynamic efficiency
- mechanical efficiency
Volumetric efficiency is the ratio between the quantity of fuel that can enter the combustion chamber and the displacement of the engine
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Cylinder Kit 47.6 pin 12 MHR Replica Modular Head
|
|
Our Price: $459.00
|
|
|
The new Malossi modular head has been specially created to guarantee elimination of the notable amount of heat that develops in an engine with a very high specific horsepower designed for racing.
It consists of a head in special hardened and tempered aluminium alloy with high silicon content that is fixed directly to the cylinder barrel. It is lapped over its entire outer surface by the coolant thus guaranteeing a very large heat-exchange surface. In addition, being unattached to the internal walls it is free to follow the expansion of the cylinder.
The combustion chamber is entirely manufactured using numerical control machines in order to ensure shape and size tolerances to within just one hundredth of a millimetre.
The modular head system is completed by a cover that closes off the upper part of the cylinder, thus guaranteeing that the coolant is fully sealed.
The geometry and cross-section of the combustion chamber for this cylinder unit have been specially designed for use in the Scooter Speed Trophy and Scooter Cross Trophy.
|
|
|
|
|
|
|
|
|
|
|
|
|
Flywheel for Electronic Ignition
|
|
Our Price: $159.00
|
|
|
Replacement Flywheel for ignition
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital Eprom MHR
|
Our Price: $259.00
Sale Price: $159.90
You Save $99.10
|
|
|
ELECTRONIC COILS
The continuous development of electronics in the automotive segment led Malossi to the creation and marketing of a complete line of electronic coils for scooters to be used on the street and for races which is at the highest level of technology.
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital PVM Fixed Advance Ignition
|
|
Our Price: $249.00
|
|
|
Each electronic coil model was expressly studied for the scooter it will be fitted on, and this is the reason why after endless tests on the bench, on rollers and on the racing track an optimal start up map (fixed or variable) has been prepared in order to obtain the best performances of the vehicle. The Malossi electronic coils were designed to allow also a very easy assembling, since they are interchangeable with the original boxes. They are compact and ergonomic, so they can be connected perfectly to the original connectors.
Furthermore, these coils allow the elimination of the rpm limiter installed on some standard power boxes, enabling in this way the full exploitation of the engine's power and torque even at the highest regimes, up to 20.000 rpm. These electronic coils are based on capacitive discharges, therefore they allow maximum limitation of circuit transients during voltage discharge, while obtaining a virtually perfect peak voltage on the spark plug (35.000 - 50.000 volts depending on the engine regime); moreover they grant extremely high discharge voltages and currents with surprising steadiness with respect to engine rpm variation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cylinder Kit Cast Iron 70cc
|
|
Our Price: $159.95
|
|
|
The cast-iron cylinder kit for the Piaggio engined scooters produced by Malossi s.p.A. are designed and manufactured with the specific abjective of obtaining high combustion efficiency, long life, and a reliability that suits the Malossi name. Owing to the experience gained in the preparation of cylinder kits for race, Malossi engineers have developed the thermodynamics of cast-iron cylinder kits to the fullest and designed the inner fuid mechanics of the cylinder kit with fanatical precision (see the tranfer pipes, exhaust and combustion chamber), thereby obtaining a high level of turbolence in the combustion chamber. The latter has permitted a substantial reduction in specific consumption and a drastic reduction in the exhaust emission of pollutants.
|
|
|
|
|
|
|
|
|
|
|
|
|
Shock Absorber Pair Front/Rear
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $399.00
|
|
|
ř 36-mm piston with two independent lamellar packs, one in extension and one in compression; lamellar system made of harmonic steel with leaf spring configuration;
LUBRIFLON-PTFE B70 piston runner guide (bronze-loaded modified compound);
Sliding on GUIDA DU guide bushing (a composite material obtained by sintering a layer of spheroidal bronze on a mild steel strap properly treated, followed by impregnation and coating with a mixture of PTFE + PB);
Polyester resin SEALTHANE grade 9345 scraper ring
38NCD4 alloy steel shock absorber rod ř 14 mm, hardened and tempered with hard chrome deposit thickness 25/30 microns (superficial hardness of the untreated shaft HRC 55/60)
|
|
|
|
|
|
|
|
|
|
|
|
|
RS3 Rear Shock Absorber
|
|
Our Price: $199.00
|
|
|
Shock absorber with adjustable spring preload. A vast improvement over original equipment and a safety improvement replacement
|
|
|
|
|
|
|
|
|
|
|
|
|
RS24/10 Rear Shock Absorber
|
Our Price: $759.00
649 $629.00
You Save $130.00
|
|
|
Fully adjustable rebound and dampening with expansion chamber for additional fluid. This shock absorber will resist fade under the most strenuous situations on the street or racing track.
|
|
|
|
|
|
|
|
|
|
|
|
|
Piaggio Scooter TC Unit RPM Control
|
|
Our Price: $219.00
|
|
|
Each electronic coil model was expressly studied for the scooter it will be fitted on, and this is the reason why after endless tests on the bench, on rollers and on the racing track an optimal start up map (fixed or variable) has been prepared in order to obtain the best performances of the vehicle. The Malossi electronic coils were designed to allow also a very easy assembling, since they are interchangeable with the original boxes. They are compact and ergonomic, so they can be connected perfectly to the original connectors.
Furthermore, these coils allow the elimination of the rpm limiter installed on some standard power boxes, enabling in this way the full exploitation of the engine's power and torque even at the highest regimes, up to 20.000 rpm. These electronic coils are based on capacitive discharges, therefore they allow maximum limitation of circuit transients during voltage discharge, while obtaining a virtually perfect peak voltage on the spark plug (35.000 - 50.000 volts depending on the engine regime); moreover they grant extremely high discharge voltages and currents with surprising steadiness with respect to engine rpm variation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Piaggio TC RPM Electronic Control
|
|
Our Price: $219.00
|
|
|
Electronic Coil TC Unit previous Number...USE 5513196 (new number)
|
|
|
|
|
|
|
