Join our mailing list!






Click here for more details

HACKER SAFE certified sites prevent over 99% of hacker crime.


You are here:Home > Benelli > 491 Sport
Sort By:
Page of 2
Gasket Set D47-47.6 LC
Gasket Set D47-47.6 LC
Our Price: $10.95 $10.95

Top End Gasket set for liquid cooled scooter
Sport Brake Pads
Sport Brake Pads
Our Price: $14.95 $14.95

USE NEW NUMBER 6215042
High performance Clutch Springs
High performance Clutch Springs
Our Price: $21.95 $21.95

High Performance Clutch Springs for stock clutches
Kevlar Belt for Overange
Kevlar Belt for Overange
Our Price: $55.95 $55.95

Kevlar Bike
Replaced by 6113386
Replaced by 6113386
Our Price: $59.95 $59.95

Replaced by 6113386 or 6114116
PRIMARY GEAR SET 13/44
PRIMARY GEAR SET 13/44
Our Price: $79.95 $79.95

Primary Gear set.  New Numbver for 7 8375
318283Malossi Cast Iron 70cc Cylinder Kit for Minerelli Engine
318283Malossi Cast Iron 70cc Cylinder Kit for Minerelli Engine
Our Price: $99.99 $99.99
Sale Price: $89.00 $89.00
You save $10.99!

Cast Iron 70cc Kit for Water Colled Minerellis.  This kit uses the original Cylinder head to save cost.
USE REPLACEMENT NUMBER 6714039
USE REPLACEMENT NUMBER 6714039
Our Price: $89.95 $89.95

These new gears were created by exploiting our 20-year experience in designing and building gears for competition and road scooters.
The new H.t.q. gears were designed and built with straight teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your scooter, thus significantly increasing its original performance potential.
Reed Valve VL12 sp .30
Reed Valve VL12 sp .30
Our Price: $94.00 $94.00

REED VALVES

These are reed valves designed with flow corner and with calculed capacity section.
The petals are made of a material composed of karbonit and carbon.
They are manufactured with advanced production processes and with the use of raw materials carefully selected.
These reed valves are designed for racing engines and they have been tested directly on race tracks.
MHR Variator
5113161 Multivar Variator Minerelli MHR
Our Price: $95.00 $95.00

TECHNICAL NOTES : the kit contains a 99.5 mm diameter mobile half pulley made of a special cast aluminium alloy. The contact surface between pulley and belt is super-finished with a diamond tool to guarantee a constant coefficient of friction, calculated to prevent both belt slip and premature wear. To satisfy the innumerable calibrations required by racing scooters, depending on track type and tuning of the motor, the kit contains 2 series of 6 rollers set and a counterspring in pre-hardened silicon-chrome steel alloy with counterclockwise (racing) winding. In addition, other springs of the same class with different loads are available as options.

Suggestions for the setting
The variator is supplied with two different roller sets: one of 3.9 gr. and one of 4.7 gr. in order to change the number of revolutions of the gear curve of your vehicle perfectly adjusting its speed and acceleration.
Variator MHR Overange
Variator MHR Overange
Our Price: $112.00 $112.00

The never-ending (incessant) power increase drove us to design (project) an extraordinary variator!

The innovative elements of this new MHR variator for OVER RANGE are:
- far better running (running further improved);
- rollers from Ř 16x13 to Ř 19x15.5 , to grant a longer gear curve;
- reinforced variator structure on bushing side, to allow greater stability and length in gear curve.


ATTENTION : the new variator will replace the previous version and consequently the codenumbersof the new OVER RANGE will also change:

VARIATOR: new code No.: 5112800 - previous code No.: 5111287
OVER RANGE: new code No.: 6112811 - previous code No.: 6111063
OVER RANGE: new code No.: 6112812 - previous code No.: 6111123
46 8610 RS3 Rear Shock Absorber
46 8610 RS3 Rear Shock Absorber
Our Price: $110.95 $110.95
Sale Price: $149.00 $149.00

Shock Absorber with adjustable spring preload.  a vast safety and handling improvement over stock or worn shock at great value
KIT DELTA CLUTCH o107/WING BELL (MINERELLI)
KIT DELTA CLUTCH o107/WING BELL (MINERELLI)
List Price: $149.90 $149.90
Our Price: $149.90 $149.90

A complete clutch upgrade with the Malossi Delta Clutch and matched clutch wing bell providing the correct instalation.
MALOSSI PERFORMANCE HOMOLOGATED EXHAUST
MALOSSI PERFORMANCE HOMOLOGATED EXHAUST
Our Price: $159.00 $159.00

IMPROVE PERFORMANCE WITH LATEST HOMOLOGATED EXHAUST SYSTEM MALOSSI "ART OF PERFORMANCE" WITH ANTI VIBRATION MOUNT
Hand Made Exhaust system for Benelli Scooters
Hand Made Exhaust system for Benelli Scooters
Our Price: $189.00 $189.00

Hand made exhaust for Benelli scooters models 491 Gt and Sport
Crankshaft MHR pin 12
Crankshaft MHR pin 12
Our Price: $199.00 $199.00

RHQ MHR Crankshaft
ITALKIT MINERELLI HORIZONTAL CRANKSHAFT W/12mm PIN
ITALKIT MINERELLI HORIZONTAL CRANKSHAFT W/12mm PIN
Our Price: $199.00 $199.00

This unbelievable MalossiUSA value compares with $299 retail crankshaft in every detail except price.  This crankshaft will work with Malossi MHR cylinders in addition to others.  Our cylinder kit number 3168746, also from Italkit is a perfect combination. This apllies to both the Yamah A/C  Jog and the L/C Axis or the L/C DRR among others.  When purchase toget you can gain even greater savings by placing your order by telephone.
CAST-I CYLINDER KIT 40 PIN 10 H2O
CAST-I CYLINDER KIT 40 PIN 10 H2O
Our Price: $229.95 $229.95

A new, technologically advanced line is created for scooters.
With the new 50-cc cast-iron H.T.Q. cylinder kit, a new chapter has begun in Malossi production, especially important for increasing driving safety.
This new line completes the range of products aimed at young people who want a high-quality, reliable product in harmony with the environment.
A product that allows users to face even long trips without fear of breakage or collapse.
Malossi engineers have used the experience gained in preparing competition engines to bring the thermodynamics of the cylinder units to the maximum levels, and also worked on the internal fluid dynamics of the cylinder unit (see transfer and exhaust lines and combustion chamber), thus achieving high turbulence in the combustion chamber which makes it possible to consistently reduce specific consumption and dramatically reduce the pollutants emitted by the exhaust.

IF THE CRANKSHAFT HAS A 12mm PINUSE PISTON 34 8538
TC Control Unit with Coil
TC Control Unit with Coil
Our Price: $239.00 $239.00

Each electronic coil model was expressly studied for the scooter it will be fitted on, and this is the reason why after endless tests on the bench, on rollers and on the racing track an optimal start up map (fixed or variable) has been prepared in order to obtain the best performances of the vehicle. The Malossi electronic coils were designed to allow also a very easy assembling, since they are interchangeable with the original boxes. They are compact and ergonomic, so they can be connected perfectly to the original connectors.
Furthermore, these coils allow the elimination of the rpm limiter installed on some standard power boxes, enabling in this way the full exploitation of the engine's power and torque even at the highest regimes, up to 20.000 rpm. These electronic coils are based on capacitive discharges, therefore they allow maximum limitation of circuit transients during voltage discharge, while obtaining a virtually perfect peak voltage on the spark plug (35.000 - 50.000 volts depending on the engine regime); moreover they grant extremely high discharge voltages and currents with surprising steadiness with respect to engine rpm variation.
RS24 Rear Shock Absorber
RS24 Rear Shock Absorber
Our Price: $348.00 $348.00

Adjustable spring preload and dampening rear shock for matchless safety and ride perofrmance