|
|
|
|
|
|
Overange Kit Minerelli
|
List Price: $415.00
Our Price: $389.00
You Save $26.00
|
|
|
This new transmission system takes full advantage of the Malossi components already on sale last year, by adding several new parts that make the entire system particularly suited to the enormous power available. This latest system hinges on the new Fixed Pulley of the torque driver that has a larger diameter and the very latest specifications. The larger diameter of this pulley allows one to have a greater velocity-ratio range compared to the original pulley that has a notably smaller external diameter. Malossi engineers have also taken particular care in realising this pulley right down to the smallest detail, using special materials and a particular type of thermochemical treatment that ensures exceptional surface hardness and therefore excellent wear and abrasion resistance. This new fixed pulley has been designed to offer perfect running if coupled to the Malossi Torque Driver that is already available and has the same diameter as the fixed pulley itself. In order to fully exploit the range of the new torque driver unit and the power ratings currently offered by competition machines, a new notched Kevlar Belt has been introduced with larger section and revised length to ensure maximum performance under all running conditions. To complete the renewal of the transmission system and take full advantage of its exceptional specifications, the Multivar variable-speed drive has also been upgraded by fitting it with new tracks for the rollers and a new hub. This new variable-speed drive represents the evolution of the previous generations, the result of many years experience on the race circuit and the currently available CAD-CAM technology that allows top-level specifications to be obtained. The whole completion of the OVER RANGE system provides for the patented adjustable clutch Delta Clutch and the Malossi reinforced clutch cap Safety Bell Clutch. New Malossi reinforced clutch cap SAFETY CLUTCH BELL art. 77 9218 is now available for scooters 50cc. The Malossi reinforced clutch cap has the function of protecting the user from a possible explosion of the clutch assembly. This protection was introduced at first in the racing scene, where this dangerous occurrence was rather frequent due to the high number of revs normally reached. Indeed, it is known that the centrifugal force developed by the rotation of a system increases to the square of the number of revs. - Considering that normally the clutch assembly has a rotating speed of about 12.000 rpm, in particular conditions it may reach and exceed 20.000 rpm, and cause the explosion of the clutch assembly. Therefore, Malossi recommends the use of this high-tech product to anybody using scooters in order to ensure its highest safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
Exhaust System MHR Scooter Racing Big Bore
|
|
Our Price: $539.00
|
|
|
Specifically designed with the new big bore cylinder kits in mind this was developed on the racetrack for the racetrack”.
It is one of the essential components intended for MALOSSI SCOOTER 70cc trophies , studied especially to increase the power of the engine at medium and high regimes.
The Malossi Scooter Trophies are raced in all the world according to precise rules that require different Special Malossi Racing products for each category. This insures an optimum and homogeneous result for the various participants while utilizing the most advanced technologies.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Big Bore MHR cylinder Kit 50mm
|
List Price: $549.00
Our Price: $519.00
You Save $30.00
|
|
|
BIG BORE Ø 50
The new BIG BORE Ø 50, stroke 39,2-39,3 and 44, cylinder kits comes from the technology of the famous Malossi 7 ports cylinders. They are designed for both Minarelli and Piaggio engines.
All pilots, thrilled about the news, wished to test them. The expectations were not disappointed : the power increase and the absolute reliability proved, once again, the high quality of the products and Malossi professionalism.
Technical specifications:
- 7 ports cylinder, H2O, gravity melted in aluminium alloy, cylinder casing coated in cermetal, lapped with diamond tools
- Bore 50
- 1 ring, strengthen and rounded head piston
- KDN5 cast iron piston ring Ø 50 x 0.8
- Modular head in primary aluminium alloy, drained, with calculated and orientated convoying system of cooling circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Crankshaft RHQ 13pin 44 Stroke
|
|
Our Price: $779.00
|
|
|
Together with the new project of BIG BORE cylinder kits, Malossi has designed a set of crankshafts with a high quality materials and a special finishing degree.
The above mentioned Malossi crankshafts must be used only coupled with Malossi BIG BORE cylinder kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
Variator MHR Overange
|
|
Our Price: $119.00
|
|
|
The never-ending (incessant) power increase drove us to design (project) an extraordinary variator!
The innovative elements of this new MHR variator for OVER RANGE are:
- far better running (running further improved);
- rollers from Ø 16x13 to Ø 19x15.5 , to grant a longer gear curve;
- reinforced variator structure on bushing side, to allow greater stability and length in gear curve.
ATTENTION : the new variator will replace the previous version and consequently the codenumbersof the new OVER RANGE will also change:
VARIATOR: new code No.: 5112800 - previous code No.: 5111287
OVER RANGE: new code No.: 6112811 - previous code No.: 6111063
OVER RANGE: new code No.: 6112812 - previous code No.: 6111123
|
|
|
|
|
|
|
|
|
|
|
|
|
Carburator PHBG 21 BS Scooter 50
|
|
Our Price: $169.00
|
|
|
DelOrto Scooter Carburator by Malossi in 21mm
|
|
|
|
|
|
|
|
|
|
|
|
|
Reed Valve VL12 sp .30
|
|
Our Price: $94.00
|
|
|
REED VALVES
These are reed valves designed with flow corner and with calculed capacity section.
The petals are made of a material composed of karbonit and carbon.
They are manufactured with advanced production processes and with the use of raw materials carefully selected.
These reed valves are designed for racing engines and they have been tested directly on race tracks.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brake Pads MHR
|
Our Price: $18.95
Sale Price: $5.29
You Save $13.66
|
|
|
BRAKE PADS sport - MHR - MHR SYNT
Brake pads
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture).
- Brake Pads Sport feature increased braking life compared to the original pads and in addition they supply a greater braking power even at lower speeds.
- Brake Pads MHR are slower to reach working temperature but provide exceptional braking at elevated speeds where deceleration is needed the most.
- Brake Pads MHR Synt : sintered without asbestos, are manufactured with a specific material that makes them an optimal choice for extreme riding conditions.
- Malossi recommends them for MAXI SCOOTERS and for SCOOTERS 50 with hiper racing utilisation.
The most evident qualities of these brake pads due to their high friction level, even at low temperatures, in comparison to the original ones, is reduced braking distance and longer life. The use of cast-iron discs is not recommended with these sintered brake pads.
Malossi Brake Pads series have passed with flying colours all the severe performance and endurance tests subjected by Malossi testers and pilots. Therefore they are ready to move from the racetracks to everyday streets!
|
|
|
|
|
|
|
|
|
|
|
|
|
Brake Pads
|
Our Price: $13.95
Sale Price: $4.95
You Save $9.00
|
|
|
BRAKE PADS sport - MHR - MHR SYNT
Brake pads
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture).
- Brake Pads Sport feature increased braking life compared to the original pads and in addition they supply a greater braking power even at lower speeds.
- Brake Pads MHR are slower to reach working temperature but provide exceptional braking at elevated speeds where deceleration is needed the most.
- Brake Pads MHR Synt : sintered without asbestos, are manufactured with a specific material that makes them an optimal choice for extreme riding conditions.
- Malossi recommends them for MAXI SCOOTERS and for SCOOTERS 50 with hiper racing utilisation.
The most evident qualities of these brake pads due to their high friction level, even at low temperatures, in comparison to the original ones, is reduced braking distance and longer life. The use of cast-iron discs is not recommended with these sintered brake pads.
Malossi Brake Pads series have passed with flying colours all the severe performance and endurance tests subjected by Malossi testers and pilots. Therefore they are ready to move from the racetracks to everyday streets!
|
|
|
|
|
|
|
|
|
|
|
|
|
Brake Pads MHR Synthetic
|
|
Our Price: $49.95
|
|
|
BRAKE PADS sport - MHR - MHR SYNT
Brake pads
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture).
- Brake Pads Sport feature increased braking life compared to the original pads and in addition they supply a greater braking power even at lower speeds.
- Brake Pads MHR are slower to reach working temperature but provide exceptional braking at elevated speeds where deceleration is needed the most.
- Brake Pads MHR Synt : sintered without asbestos, are manufactured with a specific material that makes them an optimal choice for extreme riding conditions.
- Malossi recommends them for MAXI SCOOTERS and for SCOOTERS 50 with hiper racing utilisation.
The most evident qualities of these brake pads due to their high friction level, even at low temperatures, in comparison to the original ones, is reduced braking distance and longer life. The use of cast-iron discs is not recommended with these sintered brake pads.
Malossi Brake Pads series have passed with flying colours all the severe performance and endurance tests subjected by Malossi testers and pilots. Therefore they are ready to move from the racetracks to everyday streets!
|
|
|
|
|
|
|
|
|
|
|
|
|
Crankshaft MHR Team
|
|
Our Price: $395.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multivar Variator Minerelli MHR
|
|
Our Price: $139.00
|
|
|
TECHNICAL NOTES : the kit contains a 99.5 mm diameter mobile half pulley made of a special cast aluminium alloy. The contact surface between pulley and belt is super-finished with a diamond tool to guarantee a constant coefficient of friction, calculated to prevent both belt slip and premature wear. To satisfy the innumerable calibrations required by racing scooters, depending on track type and tuning of the motor, the kit contains 2 series of 6 rollers set and a counterspring in pre-hardened silicon-chrome steel alloy with counterclockwise (racing) winding. In addition, other springs of the same class with different loads are available as options.
Suggestions for the setting
The variator is supplied with two different roller sets: one of 3.9 gr. and one of 4.7 gr. in order to change the number of revolutions of the gear curve of your vehicle perfectly adjusting its speed and acceleration.
|
|
|
|
|
|
|
|
|
|
|
|
|
Crankshaft MHR pin 12
|
|
Our Price: $299.00
|
|
|
RHQ MHR Crankshaft
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear Shock Absorber RS24/10 Remote Reservoir
|
|
Our Price: $399.00
|
|
|
Shock Absorber with adjustable spring preload, coompression and rebound dampening, with an external compensating reservoir and hose connection allowing greater internal oil capacity
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RS3 Rear Shock
|
|
Our Price: $150.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RS24 Rear Shock Absorber
|
|
Our Price: $229.00
|
|
|
Rear Shock with preload and dampening adjustmants
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kevlar Belt for Overange
|
|
Our Price: $55.95
|
|
|
Kevlar Bike
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kevlar Belt for over Range
|
|
Our Price: $55.95
|
|
|
Kevlar Belt for Over Range Kit
|
|
|
|
|
|
|
|
|
|
|
|
|
USE REPLACEMENT NUMBER 6714039
|
|
Our Price: $89.95
|
|
|
These new gears were created by exploiting our 20-year experience in designing and building gears for competition and road scooters.
The new H.t.q. gears were designed and built with straight teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly enabling you to exploit the full power of your scooter, thus significantly increasing its original performance potential.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAST-I CYLINDER KIT 40 PIN 10 H2O
|
|
Our Price: $229.95
|
|
|
A new, technologically advanced line is created for scooters.
With the new 50-cc cast-iron H.T.Q. cylinder kit, a new chapter has begun in Malossi production, especially important for increasing driving safety.
This new line completes the range of products aimed at young people who want a high-quality, reliable product in harmony with the environment.
A product that allows users to face even long trips without fear of breakage or collapse.
Malossi engineers have used the experience gained in preparing competition engines to bring the thermodynamics of the cylinder units to the maximum levels, and also worked on the internal fluid dynamics of the cylinder unit (see transfer and exhaust lines and combustion chamber), thus achieving high turbulence in the combustion chamber which makes it possible to consistently reduce specific consumption and dramatically reduce the pollutants emitted by the exhaust.
IF THE CRANKSHAFT HAS A 12mm PINUSE PISTON 34 8538
|
|
|
|
|
|
|
