Join our mailing list!






Click here for more details

HACKER SAFE certified sites prevent over 99% of hacker crime.


You are here:Home > Derbi > Aprillia > SR 2004-Carb
Choose a sub category:
SR Ditech/Aprilia
Sort By:
Page of 1
Green Variator Racing Spring
Green Variator Racing Spring
Our Price: $12.95 $12.95

VARIABLE-SPEED DRIVE ADJUSTER SPRING
Silicon-steel springs with high carbon content, heat-treated, dynamically balanced, kiln painted, designed and calculated for each specific application. Malossi Springs can be divided into three categories:
··}} REINFORCED SPRINGS with high stiffness
{· SUPER REINFORCES SPRINGS with exceptionally-high stiffness
{· RACING SPRINGS designed for high performance use and competition machines
Green is 60% resistance over the stock spring
Variator Blue Adjuster Spring Racing
Variator Blue Adjuster Spring Racing
Our Price: $14.95 $14.95

VARIABLE-SPEED DRIVE ADJUSTER SPRING
Silicon-steel springs with high carbon content, heat-treated, dynamically balanced, kiln painted, designed and calculated for each specific application. Malossi Springs can be divided into three categories:
··}} REINFORCED SPRINGS with high stiffness
{· SUPER REINFORCES SPRINGS with exceptionally-high stiffness
{· RACING SPRINGS designed for high performance use and competition machines
Blue Racing Spring is 106% resistance over the stock Variator spring
Brake Pads MHR Synthetic
Brake Pads MHR Synthetic
Our Price: $49.95 $49.95

BRAKE PADS sport - MHR - MHR SYNT
Brake pads
They were born on the racetrack, but they are perfectly suitable for the chaotic driving conditions imposed by our city traffic. Malossi Brake Pads have been designed with new ecological materials (a high percentage of carbon fibre and other metal fibres make up the pad s mixture).
- Brake Pads Sport feature increased braking life compared to the original pads and in addition they supply a greater braking power even at lower speeds.
- Brake Pads MHR are slower to reach working temperature but provide exceptional braking at elevated speeds where deceleration is needed the most.
- Brake Pads MHR Synt : sintered without asbestos, are manufactured with a specific material that makes them an optimal choice for extreme riding conditions.
- Malossi recommends them for MAXI SCOOTERS and for SCOOTERS 50 with hiper racing utilisation.
The most evident qualities of these brake pads due to their high friction level, even at low temperatures, in comparison to the original ones, is reduced braking distance and longer life. The use of cast-iron discs is not recommended with these sintered brake pads.
Malossi Brake Pads series have passed with flying colours all the severe performance and endurance tests subjected by Malossi testers and pilots. Therefore they are ready to move from the racetracks to everyday streets!
Kevlar Belt
Kevlar Belt
List Price: $54.95 $54.95
Our Price: $54.95 $54.95

Kevlar Belt replaced by 6114118
Kevlar Belt (replaces 61 9202)
Kevlar Belt (replaces 61 9202)
List Price: $59.95 $59.95
Our Price: $59.95 $59.95

Multivar Variator fo Piaggio
Multivar Variator fo Piaggio
Our Price: $74.95 $74.95

Multivar is very easy to fit and to modify.
It is developed in detail and for specific applications.
With a variator that features such sophistication, your scooter has that extra sprint, a consistency in shifting, a greater mechanical
ease at high speeds and a constancy in performance you've never experienced before with the original variator.
This is what the Malossi technicians wanted to obtain.
Fly Clutch (non adjustable) Automatic Clutch
Fly Clutch (non adjustable) Automatic Clutch
Our Price: $79.95 $79.95

Fully Automatic non adjustable clutch
TC Unit K15
TC Unit K15
Our Price: $124.95 $124.95

Flywheel for Electronic Ignition
Flywheel for Electronic Ignition
Our Price: $159.00 $159.00

Replacement Flywheel for ignition
Digitronic Carburator Conversion
Digitronic Carburator Conversion
Our Price: $219.95 $219.95

This ECU (Electronic Control Unit) converts your fuel injectioned vehicle into a carburettored vehicle.
In addition to the ECU, a carburettor and a specific cylinder and head, designed for a carburettor, (see Malossi catalogue) are required
70cc CYL kit
70cc CYL kit
Our Price: $249.00 $249.00

This cast iron cylinder kit for the Derbi liquid cooled engine has a 47mm bore and a 12mm pin.  It comes complete withhead, cylinder,piston, pin and clips, rings and complete gasket set for installation.  This kit will improve your performance greatly and to take advantage of this upgrade we recomend you upgrade your secondary gear set to part number 67 9080 (14/39) and primary gears if desired 67 13339 (15/39).
Exhaust System MHR Replica 3212734
Exhaust System MHR Replica 3212734
Our Price: $299.00 $299.00
Sale Price: $259.00 $259.00
You save $40.00!

The new range of MHR REPLICA exhaust systems has been studied by CAD systems and defined for all types of 50cc scooters.
The engineers at Malossi Engineering R&D Department have improved the vehicle’s performance according to laws, after strict testing with sophisticated and modern equipment at Malossi Engineering’s test department.
The MHR REPLICA exhaust systems address a sporting and demanding customer; they personalise your scooter with elegance and with a “performance sound”, completing the thermodynamic cycle of the famous Malossi MHR REPLICA cylinder kit.



TECHNICAL FEATURES

EXHAUST in special sheet steel (1 mm thickness) manufactured using robotic T.I.G. and M.I.G. welding of cone sections. The exhaust feature silencing baffles, aluminium alloy mounting brackets with vibration isolaters. Clear-coat finish.

SILENCER in aluminium, cast endcaps and repackable.
5511181 INNER ROTOR IGNITION
5511181 INNER ROTOR IGNITION
Our Price: $259.00 $259.00

REPLACED WITH UPDATED PART NUMBER




APRILIA




APRILIA SR (carb.) 50 2T LC 2004 (PIAGGIO)
E




LECTRIC SYSTEM IS CUT OUT
APRILIAAPRILIA SR R (carb.) 50 2T LC (PIAGGIO)ELECTRIC SYSTEM IS CUT OUT
DERBIDERBI GP1 50 2T LCELECTRIC SYSTEM IS CUT OUT
DERBIDERBI GP1 OPEN 50 2T LCELECTRIC SYSTEM IS CUT OUT
DERBIDERBI GP1 REVOLUTION 50 2T LCELECTRIC SYSTEM IS CUT OUT
GILERAGILERA DNA 50 2T LCELECTRIC SYSTEM IS CUT OUT
GILERAGILERA RUNNER 50 2T LCELECTRIC SYSTEM IS CUT OUT
GILERAGILERA RUNNER SP 50 2T LC <-2005ELECTRIC SYSTEM IS CUT OUT
GILERAGILERA RUNNER SP (carb.) 50 2T LC 2006-> (C451M)ELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO NRG 50 2T LCELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO NRG EXTREME 50 2T LCELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO NRG MC2 50 2T LC <-1997ELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO NRG MC2 50 2T LC 1998->ELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO NRG MC3 DD 50 2T LCELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO NRG Power DD 50 2T LCELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO NTT 50 2T LCELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO QUARTZ 50 2T LCELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO ZIP SP 50 2T LC <-2000ELECTRIC SYSTEM IS CUT OUT
PIAGGIOPIAGGIO ZIP SP 50 2T LC 2001->ELECTRIC SYSTEM IS CUT OUT

3111584 Aluminum Cylinder Kit 47.6 pin 12 MHR Replica Modular Head
3111584 Aluminum Cylinder Kit 47.6 pin 12 MHR Replica Modular Head
Our Price: $289.00 $289.00

The new Malossi modular head has been specially created to guarantee elimination of the notable amount of heat that develops in an engine with a very high specific horsepower designed for racing.
It consists of a head in special hardened and tempered aluminium alloy with high silicon content that is fixed directly to the cylinder barrel. It is lapped over its entire outer surface by the coolant thus guaranteeing a very large heat-exchange surface. In addition, being unattached to the internal walls it is free to follow the expansion of the cylinder.
The combustion chamber is entirely manufactured using numerical control machines in order to ensure shape and size tolerances to within just one hundredth of a millimetre.
The modular head system is completed by a cover that closes off the upper part of the cylinder, thus guaranteeing that the coolant is fully sealed.
The geometry and cross-section of the combustion chamber for this cylinder unit have been specially designed for use in the Scooter Speed Trophy and Scooter Cross Trophy.
MHR TEAM MODUL HEAD CYLINDER KIT
MHR TEAM MODUL HEAD CYLINDER KIT
Our Price: $399.00 $399.00

New number  replaces Team cylinder number 31 9285.