|
|
|
|
|
|
Reed Petal 6VL 11/
|
Our Price: $26.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Delta Clutch
|
|
Our Price: $124.95
|
|
|
The Delta Clutch was born in the racing
scene as an irreplaceable tool by allowing mechanics or owners to
adjust automatic clutches rapidly and accurately depending on tuning or
track conditions. The perfect operation of this clutch enables good
starting from standstill and exiting from corners where the speed has
decreased. This is particularly useful even in road machines allowing
tuneups for a wide RPM range. Each clutch is balanced within 3/10 of a
gram. Two spring sets, one for road use 298746 and one for racing 298747 are available and allow for tremendous increase in the Delta Clutch range of settings.
|
|
|
|
|
|
|
|
|
|
|
|
|
RHQ Crankshaft 10mm Pin
|
|
Our Price: $289.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ventilvar
|
|
Our Price: $34.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carburator Kit PHBG 19 BS MHR
|
|
Our Price: $157.95
|
|
|
Malossi fuel system
These systems have been specially designed and calibrated for high-performance motors, and are complete with all accessories needed for assembly (see generalcatalogue). MALOSSI is the leader in the design and production of special fuel systems for motorcycles and scooters.
MALOSSI systems are the result of intense research and precision drawings and calculations. The suction pipes, reed valves, and air intakes designedby MALOSSI undergo efficiency tests and destructive tests to check their performance and reliability.
Carburetors are customized for each vehicle according to the specific characteristics of the motor and air intake, and are completely calibrated for dosage ofthe air-fuel mixture under all power delivery conditions.
MALOSSI produces special components for fuel systems in order to supply a product that responds perfectly to the needs of the most demanding customer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fly Clutch
|
|
Our Price: $79.95
|
|
|
The FlyClutch has been designed and
constructed to adapt perfectly to the standard vehicle and give
impeccable performance on all occasions. The Fly Clutch automatic
clutch is pre-calibrated by our engineers after exhaustive testing
making it a state of the art, extremely long lifed, high technology
replacement for both street and racing users.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wing Clutch Bell
|
|
Our Price: $72.95
|
|
|
This clutch bell works in high performance conditions without slippage. Remember we recommend using a new clutch bell when changing the clutch.
|
|
|
|
|
|
|
|
|
|
|
|
|
Spacer kit, Carburator
|
|
Our Price: $25.90
|
|
|
SPACER KIT for eng. 50 cc YAMAHA-MINARELLI horizontal
code = 2013224
Thanks to the big experience gained on racing circuits, Malossi can propose now a new 5 mm spacer, to be placed between the crankcase and the reed valve to improve the performances of the vehicle.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cyl Kit 50cc L/C MHR TEAM Modular
|
Our Price: $459.00
Sale Price: $299.00
You Save $160.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Special Belt
|
|
Our Price: $19.95
|
|
|
THIS BELT WAS THE STANDARD OF EXCELLENCE UNTIL THE NEW MALOSSI KEVLAR BELT. PUT IT IN YOUR TOOLBOX, HANG IT ON THE GARAGE WALL-THIS IS THE BEST BUY YOU WILL MAKE FOR A SPARE BELT AT NO DAMAGE TO THE WALLET
|
|
|
|
|
|
|
|
|
|
|
|
|
Clutch Spring Set Sport
|
|
Our Price: $29.95
|
|
|
Spring Set for Delta and fly Clutches to upgrade for Sport performance
|
|
|
|
|
|
|
|
|
|
|
|
|
70cc MHR Replica Cylinder Kit
|
|
Our Price: $359.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cyl Kit 70cc
|
|
Our Price: $219.00
|
|
|
Malossi cast-iron cylinder kits: the best balance between component performanceand life of the component.
The cast-iron cylinder kits produced by Malossi s.p.A. are designed and manufactured with the specific abjective of obtaining high combustion efficiency, long life, and a reliability that suits the Malossi name. Owing to the experience gained in the preparation of cylinder kits for race, Malossi engineers have developed the thermodynamics of cast-iron cylinder kits to the fullest and designed the inner fuid mechanics of the cylinder kit with fanatical precision (see the tranfer pipes, exhaust and combustion chamber), thereby obtaining a high level of turbolence in the combustion chamber. The latter has permitted a substantial reduction in specific consumption and a drastic reduction in the exhaust emission of pollutants
|
|
|
|
|
|
|
|
|
|
|
|
|
Overange Kit Minerelli
|
List Price: $415.00
Our Price: $389.00
You Save $26.00
|
|
|
This new transmission system takes full advantage of the Malossi components already on sale last year, by adding several new parts that make the entire system particularly suited to the enormous power available. This latest system hinges on the new Fixed Pulley of the torque driver that has a larger diameter and the very latest specifications. The larger diameter of this pulley allows one to have a greater velocity-ratio range compared to the original pulley that has a notably smaller external diameter. Malossi engineers have also taken particular care in realising this pulley right down to the smallest detail, using special materials and a particular type of thermochemical treatment that ensures exceptional surface hardness and therefore excellent wear and abrasion resistance. This new fixed pulley has been designed to offer perfect running if coupled to the Malossi Torque Driver that is already available and has the same diameter as the fixed pulley itself. In order to fully exploit the range of the new torque driver unit and the power ratings currently offered by competition machines, a new notched Kevlar Belt has been introduced with larger section and revised length to ensure maximum performance under all running conditions. To complete the renewal of the transmission system and take full advantage of its exceptional specifications, the Multivar variable-speed drive has also been upgraded by fitting it with new tracks for the rollers and a new hub. This new variable-speed drive represents the evolution of the previous generations, the result of many years experience on the race circuit and the currently available CAD-CAM technology that allows top-level specifications to be obtained. The whole completion of the OVER RANGE system provides for the patented adjustable clutch Delta Clutch and the Malossi reinforced clutch cap Safety Bell Clutch. New Malossi reinforced clutch cap SAFETY CLUTCH BELL art. 77 9218 is now available for scooters 50cc. The Malossi reinforced clutch cap has the function of protecting the user from a possible explosion of the clutch assembly. This protection was introduced at first in the racing scene, where this dangerous occurrence was rather frequent due to the high number of revs normally reached. Indeed, it is known that the centrifugal force developed by the rotation of a system increases to the square of the number of revs. - Considering that normally the clutch assembly has a rotating speed of about 12.000 rpm, in particular conditions it may reach and exceed 20.000 rpm, and cause the explosion of the clutch assembly. Therefore, Malossi recommends the use of this high-tech product to anybody using scooters in order to ensure its highest safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
Variator MHR Overange
|
|
Our Price: $119.00
|
|
|
The never-ending (incessant) power increase drove us to design (project) an extraordinary variator!
The innovative elements of this new MHR variator for OVER RANGE are:
- far better running (running further improved);
- rollers from Ø 16x13 to Ø 19x15.5 , to grant a longer gear curve;
- reinforced variator structure on bushing side, to allow greater stability and length in gear curve.
ATTENTION : the new variator will replace the previous version and consequently the codenumbersof the new OVER RANGE will also change:
VARIATOR: new code No.: 5112800 - previous code No.: 5111287
OVER RANGE: new code No.: 6112811 - previous code No.: 6111063
OVER RANGE: new code No.: 6112812 - previous code No.: 6111123
|
|
|
|
|
|
|
|
|
|
|
|
|
Carburator PHBG 21 BS Scooter 50
|
|
Our Price: $169.00
|
|
|
DelOrto Scooter Carburator by Malossi in 21mm
|
|
|
|
|
|
|
|
|
|
|
|
|
Reed Valve VL12 sp .30
|
|
Our Price: $94.00
|
|
|
REED VALVES
These are reed valves designed with flow corner and with calculed capacity section.
The petals are made of a material composed of karbonit and carbon.
They are manufactured with advanced production processes and with the use of raw materials carefully selected.
These reed valves are designed for racing engines and they have been tested directly on race tracks.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gasket Set D47-47.6 LC
|
|
Our Price: $10.95
|
|
|
Top End Gasket set for liquid cooled scooter
|
|
|
|
|
|
|
|
|
|
|
|
|
Multivar Variator Minerelli MHR
|
|
Our Price: $139.00
|
|
|
TECHNICAL NOTES : the kit contains a 99.5 mm diameter mobile half pulley made of a special cast aluminium alloy. The contact surface between pulley and belt is super-finished with a diamond tool to guarantee a constant coefficient of friction, calculated to prevent both belt slip and premature wear. To satisfy the innumerable calibrations required by racing scooters, depending on track type and tuning of the motor, the kit contains 2 series of 6 rollers set and a counterspring in pre-hardened silicon-chrome steel alloy with counterclockwise (racing) winding. In addition, other springs of the same class with different loads are available as options.
Suggestions for the setting
The variator is supplied with two different roller sets: one of 3.9 gr. and one of 4.7 gr. in order to change the number of revolutions of the gear curve of your vehicle perfectly adjusting its speed and acceleration.
|
|
|
|
|
|
|
|
|
|
|
|
|
Crankshaft MHR pin 12
|
|
Our Price: $299.00
|
|
|
RHQ MHR Crankshaft
|
|
|
|
|
|
|
