|
|
|
|
|
|
Clutch Springs
|
Our Price: $19.95
|
|
|
Pre hardened carbon steel springs with heat resistant color coding paint.
|
|
|
|
|
|
|
|
|
|
|
|
|
RHQ Crankshaft MHR
|
|
Our Price: $429.00
|
|
|
TECHNICAL SPECIFICATIONS
- Half-shafts material: 18 Ni Cr Mo5.
- Half-shafts with forged monolithic rotating masse.
- Manufactured using high-precision machine tools.
- All components are subjected to 5 heating treatment operations.
- Excellent surface finish for improved reliability.
- Dynamic balancing for speeds of up to 16,000 rpm.
- Coppered connecting rod in forged 18 Ni Cr Mo5, connected to the engine with precision roller bearing for high speeds.
|
|
|
|
|
|
|
|
|
|
|
|
|
Carburator Kit PHBG 19 BS MHR
|
|
Our Price: $157.95
|
|
|
Malossi fuel system
These systems have been specially designed and calibrated for high-performance motors, and are complete with all accessories needed for assembly (see generalcatalogue). MALOSSI is the leader in the design and production of special fuel systems for motorcycles and scooters.
MALOSSI systems are the result of intense research and precision drawings and calculations. The suction pipes, reed valves, and air intakes designedby MALOSSI undergo efficiency tests and destructive tests to check their performance and reliability.
Carburetors are customized for each vehicle according to the specific characteristics of the motor and air intake, and are completely calibrated for dosage ofthe air-fuel mixture under all power delivery conditions.
MALOSSI produces special components for fuel systems in order to supply a product that responds perfectly to the needs of the most demanding customer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sport Brake Pads
|
|
Our Price: $14.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cyl Kit Alum 50 MHR Replica
|
|
Our Price: $369.00
|
|
|
MHR REPLICA CYLINDER KIT
The MHR Replica line of cylinder was created especially for the International Scooter Trophy 70cc Automatic Class. These cylinder kits were designed to guarantee maximum performance in this category, while at the same time assuring extremely long product life.
In order to guarantee these special characteristics, Malossi MHR Replica cylinder kit have pistons with two chrome-plated rectangular segmants and a compression ratio of 13.8:1, plus torque value of 7.35 N.m. (o.75 Kgm) at 8.000 rpm and power of 6.6 Kw (9 C.V.) at 8.500 rpm.
The MHR line is the results of Malossi's many years of experience in European and National competitions. These new cylinder kits are composed principally of cylinder- piston ring head.
|
|
|
|
|
|
|
|
|
|
|
|
|
TC Unit K15
|
|
Our Price: $124.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NLA use 3113905
|
|
Our Price: $319.00
|
|
|
This kit will breath some life into the 50cc kit for four stokers. Coupled with the cam 59 11988 it will be a great performance enhance.
TECHNICAL FEATURES
Cylinder
- Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel die and crossed smoothing with two diamond passages with very limited tolerances.
- Machining: on machine tools with high precision numerical control.
- Cylinder-piston connection with an allowance of 0.05 mm.
- Recalculated and upgraded heat exchange surfaces.
Piston
- Ultra compact with 3 rings.
- Material: special aluminium alloy with high silicon content, low thermal expansion and a tin facing on the sliding surfaces.
- Machining on machine tools with numerical control.
- Lightened and reinforced.
- Upgraded heat exchange surfaces.
Piston rings
- Special rings with high sliding ease and very high mechanical resistance.
- I° ring compression in nitrided and chromium steel.
- II° special cast iron ring.
- Three - piece scraper ring made of chromium-plated special steel
|
|
|
|
|
|
|
|
|
|
|
|
|
Sport Brake Pads
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $4.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MHR Brake Pads
|
|
Product price is not filled in. This product cannot be purchased.
Our Price:
Sale Price: $5.25
|
|
|
MHR Brake Pads are slower to reach operating temperature but have greater stopping power at elevated speeds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Synthetic Brake Pads
|
|
Our Price: $65.00
|
|
|
Synthetic pads are made without asbestos from a specific material making them the best choice for high performance applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cyl Kit 70cc
|
|
Our Price: $189.00
|
|
|
This kit fits the Italjet Formula 50 A/C scooter and others like Aprilia and Kymco models using the Franco Morini engine. It is recommended for street sport performance coupled with Malossi reliability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
70cc CYL kit
|
|
Our Price: $279.00
|
|
|
This cast iron cylinder kit for the Derbi liquid cooled engine has a 47mm bore and a 12mm pin. It comes complete withhead, cylinder,piston, pin and clips, rings and complete gasket set for installation. This kit will improve your performance greatly and to take advantage of this upgrade we recomend you upgrade your secondary gear set to part number 67 9080 (14/39) and primary gears if desired 67 13339 (15/39).
|
|
|
|
|
|
|
|
|
|
|
|
|
Overange Kit Minerelli
|
List Price: $415.00
Our Price: $389.00
You Save $26.00
|
|
|
This new transmission system takes full advantage of the Malossi components already on sale last year, by adding several new parts that make the entire system particularly suited to the enormous power available. This latest system hinges on the new Fixed Pulley of the torque driver that has a larger diameter and the very latest specifications. The larger diameter of this pulley allows one to have a greater velocity-ratio range compared to the original pulley that has a notably smaller external diameter. Malossi engineers have also taken particular care in realising this pulley right down to the smallest detail, using special materials and a particular type of thermochemical treatment that ensures exceptional surface hardness and therefore excellent wear and abrasion resistance. This new fixed pulley has been designed to offer perfect running if coupled to the Malossi Torque Driver that is already available and has the same diameter as the fixed pulley itself. In order to fully exploit the range of the new torque driver unit and the power ratings currently offered by competition machines, a new notched Kevlar Belt has been introduced with larger section and revised length to ensure maximum performance under all running conditions. To complete the renewal of the transmission system and take full advantage of its exceptional specifications, the Multivar variable-speed drive has also been upgraded by fitting it with new tracks for the rollers and a new hub. This new variable-speed drive represents the evolution of the previous generations, the result of many years experience on the race circuit and the currently available CAD-CAM technology that allows top-level specifications to be obtained. The whole completion of the OVER RANGE system provides for the patented adjustable clutch Delta Clutch and the Malossi reinforced clutch cap Safety Bell Clutch. New Malossi reinforced clutch cap SAFETY CLUTCH BELL art. 77 9218 is now available for scooters 50cc. The Malossi reinforced clutch cap has the function of protecting the user from a possible explosion of the clutch assembly. This protection was introduced at first in the racing scene, where this dangerous occurrence was rather frequent due to the high number of revs normally reached. Indeed, it is known that the centrifugal force developed by the rotation of a system increases to the square of the number of revs. - Considering that normally the clutch assembly has a rotating speed of about 12.000 rpm, in particular conditions it may reach and exceed 20.000 rpm, and cause the explosion of the clutch assembly. Therefore, Malossi recommends the use of this high-tech product to anybody using scooters in order to ensure its highest safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
70cc Cylinder Kit Cast Iron Ditech P
|
|
Our Price: $479.00
|
|
|
With the new INJECTION TECH range of products a new chapter is written, an answer, the racing world was anticipating, to satisfy the growing number of Malossi Trophy Races for 70cc scooters.
TECHNICAL FEATURES cylinder kits
CAST IRON CYLINDER - Technology
- Material: special self-lubricating, wear-resistant, highly refined cast iron alloys, obtained by Shell Moulding gravity die-casting.
- Machining: on numerically controlled high precision machine tools.
- Recalculated heat exchange surfaces.
- Exhaust and transfer ports designed and tested for maximum thermodynamic performance.
- Shape and surface texture dimensional checks.
- Cylinder and piston selected for a 100% fit of 0.010-0.005 mm.
- Checking of all the seals carried out.
ALUMINIUM CYLINDER - Technology
- Cylinders obtained by gravity die-casting in permanent steel moulds.
- Material: hardened and tempered high silicon content primary aluminium alloy.
- Machining: on numerically controlled high precision machine tools.
- Cylinder liner with silicon carbide metal-spray coating on a galvanic nickel matrix, cross-honed with passes with diamonds for very tight tolerances.
- Heat exchange surfaces recalculated.
- Exhaust and transfer ports designed and tested for maximum thermodynamic performance.
- Shape and surface texture dimensional checks.
- Cylinder and piston selected for a fit of 0.010-0.005 mm.
- Checking of all the seals carried out.
PISTON
- Material: special aluminium alloy with high silicon content and low thermal expansion.
- Machining: on numerically controlled machine tools.
- Lightened and strengthened.
- Heat exchange surfaces increased.
PISTON RINGS
- Rings in very strong modular cast iron with ground, wear-resistant, hard chrome metal-spray coating on the contact surface.
HEAD
- Material: special die-cast aluminium alloy.
- Geometry of heat exchange surfaces recalculated and increased (air-cooled models).
- Cooling circuit sections and paths recalculated and resized (liquid-cooled models).
- Machining: numerically controlled high precision machines with diamond tools.
- Surface rust prevention treatment.
NOTICE:
FOR THE PROPER WORKING OF THE KIT IT IS ABSOLUTELY NECESSARY TO USE THE TC UNIT SUPPLIED IN THE KIT AND TO SUBSTITUTE THE PRIMARY GEARS WITH THE HTQ MALOSSI ONE, TOGETHER WITH THE ORIGINAL EXHAUST SYSTEM OR THE MALOSSI ONE.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner Rotor Ignition MHR
|
|
Our Price: $498.00
|
|
|
The New Malossi inner rotor ignition systemis based on the state of the art technology applied to scooter cross and speed racin. Such a new sysytem resulted from the need to overcome the technical limitations imposed by conventional flywheel ignitions, which cannot ensure consisitant performance above 10,000 rpm and caused severe tuning problems for racing engines.
Malossi now offers control with an inner rotor that provides regular performance over 20,000 rpm and eliminates all problems associated conventional ignition units.
|
|
|
|
|
|
|
|
|
|
|
|
|
Malossi Performance Exhaust System
|
|
Our Price: $329.00
|
|
|
Malossi Performance exhaust system for scooters. Performance increases due to precise design matching Malossi 70cc MHR kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
REED BLOCK
|
|
Our Price: $89.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carb Kit PHBG 21 DS
|
|
Our Price: $139.00
|
|
|
For Vehicles produced 2000 and on.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carb Kit PHBH 26 BS MHR
|
|
Our Price: $269.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
REED VALVE
|
|
Our Price: $59.00
|
|
|
|
|
|
|
|
|
|
